Quality Assessment Of Digital Surface Models Generated From IKONOS Imagery

The growing applications of digital surface models (DSMs) for object detection, segmentation and representation of terrestrial landscapes have provided impetus for further automation of 3D spatial information extraction processes. While new technologies such as lidar are available for almost instant DSM generation, the use of stereoscopic high-resolution satellite imagery (HRSI), coupled with image matching, affords cost-effective measurement of surface topography over large coverage areas. This investigation explores the potential of IKONOS Geo stereo imagery for producing DSMs using an alternative sensor orientation model, namely bias-corrected rational polynomial coefficients (RPCs), and a hybrid image-matching algorithm. To serve both as a reference surface and a basis for comparison, a lidar DSM was employed in the Hobart testfield, a region of differing terrain types and slope. In order to take topographic variation within the modelled surface into account, the lidar strip was divided into separate sub-areas representing differing land cover types. It is shown that over topographically diverse areas, heighting accuracy to better than 3 pixels can be readily achieved. Results improve markedly in feature-rich open and relatively flat terrain, with sub-pixel accuracy being achieved at check points surveyed using the global positioning system (GPS). This assessment demonstrates that the outlook for DSM generation from HRSI is very promising.     

Spectral Filtering and Classification of Terrestrial Laser Scanner Point Clouds

A method is presented for filtering and classification of terrestrial laser scanner point clouds. The algorithm exploits the four-channel (blue, green, red and near infrared) multispectral imaging capability of some terrestrial scanners using supervised, parametric classification to assign thematic class labels to all scan cloud points. Its principal advantage is that it is a completely data-driven algorithm and is independent of spatial sampling resolution since the processing is performed in four-dimensional spectral feature space. Its application to two data-sets of different spatial extent and spatial and spectral complexity is reported, for which respective overall classification accuracies of 87·0% and 82·0% were achieved. Analysis of the input data with emphasis on the characteristics pertinent to the anticipated outcomes precedes detailed analysis of the classification results and error sources and their causes. Erroneously classified points are attributed to radiometric errors stemming from both detector hardware and physical effects.     

梅雨锋云系的结构特征及其成因分析

利用逐时卫星遥感观测资料和地面测站的降水资料，分析了江淮流域2003年6月22～26日暴雨过程中梅雨锋云系的演变、结构特征和形成原因。结果表明，梅雨锋云系为一条TBB的低值带，稳定少动，其上分布着中尺度对流系统（MCS），而中尺度对流系统是由不同尺度、不同强度．的对流单体（包括中β和中γ尺度对流单体）组成的，从而使得梅雨锋云系产生不均匀的降水分布（包括时间上和空间上）。在该暴雨过程中，梅雨锋云系充分体现了中尺度对流系统中所包括的3类组织结构形式。梅雨锋云系与中高纬度云系或热带辐合带云系之间的相互作用与暴雨过程关系密切，梅雨锋云系的维持和发展与强大的黄淮气旋云系直接相关，它是江淮流域上空冷暖气流交汇的结果。     

佳木斯地区冬、春季大-暴雪成因分析

冬、春季的天气影响系统既有共同点，又有不同之处。通过近20a大-暴雪个例的物理成因及卫星云图等特征的分析，总结出有预报意义的指标。     

用SSM/I微波遥感图像分析海上台风的螺旋云带

文中介绍了美国国防气象卫星专用微波成像仪 (SSM /I)上各通道的特性 ,分析了大气中各种粒子 (尤其是云滴和降水滴 )对各通道辐射的吸收和散射效应。通过对SSM /I图像上台风单通道剖面、双通道散点图的分析 ,揭示了台风在微波图像上表现形式的内在物理原因。在此基础上 ,设计了一个降水指数 ,方法是 :将 85 .5GHz的吸收段对称拉伸到散射段的延长线上 ,然后求归一化后的 19.35 ,37.0GHz和经拉伸处理的 85 .5GHz图像 3者的平均值。 3个通道合成降水指数克服了 37.0GHz对大雨滴不敏感 ,和 85 .5GHz对中等大小雨滴不敏感的缺点 ,比原始单通道微波图像更清楚地显示了台风的螺旋云带结构     

乌鲁木齐雷暴天气的云图分析

通过对1997－1999年乌鲁木齐发生的11次雷暴天气的分析表明，雷暴天气发生于850hPa上反气旋环流的东南边缘的高能量区，雷暴云图由孤立的对流云图和锋面及涡旋云系中的对流云图发展而成，其形状不规则，生命史4－8h，当雷暴云图成熟时产生雷暴天气现象。     

2001年影响广西的台风卫星云图特征分析

应用定性和定量分析方法 ,对 2 0 0 1年 4个影响广西的台风云图特征进行分析 ,发现旋转结构明显、组织结构紧密、面积大的台风云系 ,所产生的台风强度强、持续时间长、降水范围宽、过程雨量大     

南疆地区降水云系的探讨

普查南疆1998－2000年3aGMS5静止卫星红外云图，共有192次云系影响南疆，分为5种类型，南疆云系出现的次数较少，常造成中弱以下降水天气，有云无降水的情况较多，并讨论了云系的TBB与降水之间的关系，冬季南疆阴雾天气在红外云图上其TBB值为－10℃的闭合中心。     

北疆夏季两次冰雹天气过程的对比分析

北疆夏季两次冰雹天气过程的对比分析发现，充足的水汽、足够大的上升运动和不稳定的层结果冰雹天气出现的必备条件，而降雹的强弱则与对流云图的发展和强度有关。     

南疆西部山区一次特大暴雨特征分析

通过对2001年9月22－23日南疆西北部山区特大暴雨的环流背景、物理量场、卫星云图分析，揭示了这场特大暴雨的物理机制和各要素场特征。